Infinity DMC 1000, Руководство пользователя, Страница: 80 / 150

80 DMC 1000 Digital Media Camcorder User’s Guide (v1.15)
Chapter 6 - Audio setup
6.2 Inputs
Refer to Section 11.2 on page 105 for detailed pin layouts for several audio connectors.
Location Connector Function
Front microphone
input (Front1 or
Front2) This XLR-3 socket accepts a balanced mono
microphone signal from a high quality dynamic
microphone. A phantom power supply is provided as
standard.
When the optional DMC1180 stereo front
microphone connector kit is installed, this socket is
replaced with a 5-pin XLR female socket that accepts
a stereo balanced microphone.
Headset
microphone
input (MicRear) Connect a headset microphone to this mini-jack
3.5 mm) socket.
Audio
Input 1 (Rear1) This XLR-3 socket accepts balanced audio signals
from microphones or line level sources.
With the switch under the socket, set the input to
either:
• line
• mic
• mic +48 V phantom power
Audio
Input 2 (Rear2) This XLR-3 socket accepts balanced audio signals
from microphones or line level sources.
With the switch under the socket, set the input to
either:
• line
• mic
• mic +48 V phantom power
Digital SDI audio
inputs (SDI1 to
SDI8) Eight channels of embedded SDI inputs.
Digital AES audio
inputs (AES1 and
AES2) Two-channel digital audio input compliant with the
AES/EBU protocol.
Wireless
microphone
inputs (Wrx1) Wireless microphone input. Requires the installation
of a wireless receiver unit (optional).
Front microphone
input
Audio Out 11-17V 7A
11-17V
1A max.
Audio
In 1
Mic Line +48V
In 2
Mic Line +48V
Audio
Input 2
Audio
Input 1
Headset microphone
input (MicRear)
Digital SDI
audio input
Digital AES
audio input