background image

1

I

NFINITY

C

LASSIA

PSW310W

The Infinity Classia PSW310W continues the legendary Infinity

®

dedication to accurate sound reproduction.The patented Ceramic
Metal Matrix Diaphragm (CMMD

®

) drivers, high-powered amplifier

and proprietary Room Adaptive Bass Optimization System

(R.A.B.O.S.

) technology, along with a rigid, well-braced

enclosure, combine to deliver uncompromised bass performance
in any stereo or multichannel home theater.

In addition, the PSW310W’s compact enclosure and 
wireless capability allow for easy integration into any 
residential environment.

U

NPACKING THE

S

UBWOOFER

If you suspect damage from transit, report it immediately to your
dealer. Keep the shipping carton and packing materials for
future use.

Included

1 x Owner’s manual 

1 x USA warranty sheet 

1 x Subwoofer

1 x 15' (4.5m) Audio cable, RCA-RCA

4 x Spiked feet

1 x Transmitter module

1 x Power supply for transmitter

1 x 120V two-prong AC power cord for transmitter power supply

1 x 6' Audio cable, RCA-RCA

1 x Wall-mount bracket for transmitter 

2 x With two panhead M3 x 4 machine screws for attaching

wall-mount bracket to transmitter

4 x Small, round, self-adhesive feet – to be attached on

transmitter’s left-side panel if transmitter is to be 
used vertically

P

LACEMENT

Since the installation of a subwoofer can be somewhat more
complicated than installing full-range speakers, it is essential
that you read this section very carefully prior to connecting the
subwoofer to your system. Should you have questions relating to
your installation, it is advisable to call either your dealer or the
Infinity Customer Service Department for advice.

The performance of the subwoofer is directly related to its
placement in the listening room and how you align the subwoofer
with its satellite speakers.The PSW310W’s wireless capability
makes it even easier to properly locate the subwoofer in your
room. Setting the volume of the subwoofer in relation to the left
and right speakers is also of critical importance because it is
essential that the subwoofer integrate smoothly with the entire
system. Setting the subwoofer’s volume level too high will result
in an overpowering, boomy bass. Setting the volume level too low
will negate the benefits of the subwoofer.

Here are several additional facts on installation that may prove
useful. It is generally believed by most audio authorities that low
frequencies (below 125Hz) are nondirectional and, therefore,
placement of a subwoofer within any listening room is not
critical. While in theory it is true that the larger wavelengths of
extremely low frequencies are basically nondirectional, the fact 
is that, when installing a subwoofer within the limited confines 
of a room, reflections, standing waves and absorptions generated
within the room will strongly influence the performance of any
subwoofer system. As a result, the specific location of the
subwoofer becomes important, and it is strongly recommended that
you experiment with placement before choosing a final location.

Placement will depend upon your room and the amount and
quality of bass required (for example, whether or not your room
permits placement of the subwoofer near either satellite).

Figure 1. This example shows the subwoofer positioned behind
the right-channel satellite speaker to re-create the actual
location of bass instruments in an orchestra and/or add impact
to movie soundtracks.

SUB

RIGHT-
CHANNEL

SPEAKER

PRIMARY
LISTENING
AREA

INFINITY CLASSIA PSW310W (120V)

I

NSTALLING

S

PIKED

F

EET

Four metal spikes are supplied for use when the subwoofer is to
be placed on a carpeted surface to decouple the subwoofer from
the floor and prevent unwanted damping.To insert the spikes, gently
lay the subwoofer on its back (not on its front or side) on a soft,
nonabrasive surface. Each spike screws into the threaded insert.
Make sure all four spikes are screwed in completely for stability.

NEVER drag the subwoofer to move it, as this will damage the spikes,
the feet, the wood cabinet itself and/or the floor. Always lift the
subwoofer and carry it to its new location.

Содержание CLASSIA PSW310W

























Отзывы: