Infinity 880FL, Руководство пользователя

Страница: 17 / 40

17 LT6387 Iss 4 (05/14)
880 FL
Users Instructions
SECTION FIVE General Points
Like all appliances incorporating an aerated burner a low
frequency noise may be heard, particularly on the low
setting, this is quite normal and does not affect the
operation of the appliance.
It is advised that a competent person service the 880 FL
fire annually. The fire is more likely to provide trouble-free
operation.
Dulling and slight discoloration inside the firebox will occur
adding to the realism of the appliance. This is normal.
It is important that: -
The chimney or flue is checked annually to ensure
clearance of combustion products. This can be inspected
by removing the inner firebox and removal of the
inspection covers located on the back and top of the outer
firebox. This can be obtained by doing the following.
880 FL
Users Instructions
SECTION FIVE General Points Continued

Remove the two side covers LH and RH which
are held with magnets.

Undo the two M4 nuts retaining the glass fixing
bracket using the tool provided then pull clear
and remove from location studs.

Carefully lift the glass panel from within the
bottom retaining slot.

Remove the log fuel bed shapes.

Lift out the air tray assembly from the location
points within the shelf.

Pull out the air grill and disconnect the battery
holder from the lead and remove.

Remove the two screw retaining the gas
connection cover from within the burner shelf
and remove cover. Shut down restrictor elbow
and disconnect the 8mm inlet nut.

Undo the three fixing screws from the burner
tray and lift out burner tray assembly taking care