Infinity 200300 Скачать руководство пользователя страница 24

Страница: 24 / 52

Ordercode: 200300

TCYC-7 Cyclorama

8. DMX Lost Mode
In this menu you can determine the behaviour of the Cyclorama in case of a DMX failure.
The display will blink (only if Display set to “Auto Off”).

01)

While in the main menu, press the UP/DOWN buttons until the display shows

02)

Press the ENTER button to open the menu.

03)

Press the UP/DOWN buttons to choose one of the 3 options:

The device will fall back on the last properly working DMX signal from before the
DMX signal error, which ensures undisrupted performance.

The device will black out in case of a DMX failure.

The device will fall back on the last working settings from Manual mode.

04)

Press the ENTER button to confirm.

9. Fan Mode
In this menu you can control the speed of the fan.

01)

While in the main menu, press the UP/DOWN buttons until the display shows

02)

Press the ENTER button to open the menu.

03)

Press the UP/DOWN buttons to set the speed of the fan. Choose one of the 3 options

04)

Press the ENTER button to confirm.

10. PWM Frequency
In this menu you can set the PWM frequency.

01)

While in the main menu, press the UP/DOWN buttons until the display shows

02)

Press the ENTER button to open the menu.

03)

Press the UP/DOWN buttons to set the device’s PWM frequency. The adjustment range is between

, in increments of 10Hz.

04)

Press the ENTER button to confirm.

11. Calibration
In this menu you can enable or disable the color calibration software.

01)

While in the main menu, press the UP/DOWN buttons until the display shows

02)

Press the ENTER button to open the menu.

03)

Press the UP/DOWN buttons to choose between

and

04)

If you choose

, the color calibration software will be activated (recommended).

05)

Press the ENTER button to confirm.

Содержание 200300





















































Результаты поиска

Содержание 200300

Отзывы:

Похожие инструкции для 200300

Бренды по названию

Популярные бренды

Infinity 200300, Руководство пользователя

Результаты поиска

Содержание 200300

Отзывы:

Похожие инструкции для 200300

Бренды по названию

Популярные бренды