Infiniton DIW 61STB, Инструкция по эксплуатации

Страница: 94 / 156

Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1. .
2. Within 60 seconds after step 1, press the Start/Pause button more than 5 seconds,
and then press the Delay “+” button to enter the set model, the rinse aid indication
blinks as 1Hz frequency.
3. Press the Start/Pause button to select the proper set according to your using habits,
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
Switch on the appliance
12
Filling The Rinse Aid Reservoir
3
Close the cap after all.
1
2
Remove the rinse reservoir cap by
lifting up the handle .
Pour the rinse aid into the dispenser,
being careful not to overfill.