Notices for installati
----
�
Requirements for operations at raised height
J
---
--
• When carrying out installation at 2m or higher above the base
level, safety belts must be worn and rapes of sufficient strength be
securely fasten to the outdoor unit, to prevent falling that could
cause personal injury or death as well as property loss.
--------
,
"-
Grounding Requirements
.J,
-------
• The air conditioner is the class I electrical appliance and must
ensure a reliable grounding.
• Do not connect the grounding wire to a gas pipe, water pipe,
lightning rod, telephone line, or a circuit poorly grounded to the earth.
• The grounding wire is specially designed and shall not be used far
other purpose, nor shall it be fastened with a common tapping screw.
e lnterconnection cord diameter should be recommended as per
instruction manual ,and with type O terminal that meet local standards
(interna! diameter of type O terminal needs to match the screw size of
the unit, no more than 4.2mm). After installation, check the screws
whether have been fixed effectively, and there is no risk of loosening.
Others
• The connection method of the air conditioner and the power
cable and the interconnection method of each independent
element shall be subject to the wiring diagram affixed to the
machine.
• The model and rating value of the fuse shall be subject to the
silkscreen on corresponding controller or fuse sleeve.
Packing list
Packing list of the indoor unit
Packing list of the outdoor unit
Name
Quantity Unit
Name
Quantity Unit
lndoor Unit
1
Set
Outdoor Unit
1
Set
Remate Controller
1
PC
Connecting pipe
2
PC
Batteries (7#)
2
PC
Plastic Strap
1
ROLL
Owner's manual
1
Set
Pipe Protection Ring
1
PC
Drain pipe
1
PC
Luting (putty)
1
PACKET
NOTE: lnterconnection cord is optional accessorie.
AII accessories shall be subject to actual packaging material, and if there is any
difference, please understand.
- 17 -
www.infiniton.es
©@
