Infiniton 8445639000748, Инструкция по эксплуатации / Руководство по установке

Страница: 79 / 135

78

Be aware that the glue that join the plastic or wooden
material to the furniture, has to resist to temperature
not below 150
℃
, to avoid the unstuck of the paneling.

The rear wall, adjacent and surrounding surfaces must
therefore be able to withstand an temperature of 90
℃
.
9.2 Before installing the hob, make sure that
•
The work surface is square and level, and no structural members interfere
with space requirements.
•
The work surface is made of a heat-resistant and insulated material.
• If the hob is installed above an oven, the oven has a built-in cooling fan.
•
The installation will comply with all clearance requirements and applicable
standards and regulations.
•
A suitable isolating switch providing full disconnection from the mains
power supply is incorporated in the permanent wiring, mounted and
positioned to comply with the local wiring rules and regulations.
• The isolating switch must be of an approved type and provide a 3 mm air
gap contact separation in all poles (or in all active [phase] conductors if the
local wiring rules allow for this variation of the requirements).
•
The isolating switch will be easily accessible to the customer with the hob
installed.
•
You consult local building authorities and by-laws if in doubt regarding
installation.
•
You use heat-resistant and easy-to-clean finishes (such as ceramic tiles)
for the wall surfaces surrounding the hob.