Infiniton 8436546191469, Инструкция по эксплуатации

Страница: 12 / 52

12
TABLE2:
How to Convert Gas Source
Adjustment of the reduced valve flow
Burners Flame Converting the
hob from LPG
to natural gas
Converting the
hob from natural gas
Gas to LPG
Regular burners
Full flame Replace the burner
Nozzle according
To the guidelines in
table 1
Replace the burner
Nozzle according
to the guidelines in
table 1
Saving flame Loosen the adjustment
Spindle ( see fig.7 below )
And adjust the flame
Loosen the adjustment
Spindle ( see fig.7 below )
And adjust the flame
Valve adjustment
Valve adjustment should be done with the control knob set at Burner ON saving flame position.
Remove the knob, and adjust the flame with a tiny screwdriver (see fig.7 below).
Fig.7
To check the adjusted flame: heat the burner at full open position for 10 minutes. Then turn the knob into the
saving setting. The flame should not extinguish nor move to the nozzle. If it extinguish or moves to the
nozzle, readjust the valves.
Flame selection
As the burners are adjusted correctly, the flame should be light blue, and the inner flame should be clear.
The size of flame depends on the position of the related control knob.
-Burner ON, large flame -Burner ON, small flame
（
saving mode
）
-Burner OFF
Fig.8
See fig.8 for various operating options (flame size selection); the burner should be set at a large flame
during the initial phase of cooking, it make food boil quickly. Then should turn knob to the saving flame