Infiniton 8436546191254, Инструкция по эксплуатации

Страница: 7 / 44

6
(3) Plug the refrigerator
Plug the refrigerator into a dedicated, properly installed wall outlet. After the compressor works for
an hour, open the freezer door and you will find the temperature falls obviously and this shows
proper refrigeration.
(4) Put the food in the refrigerator after the unit fully cools down
After the refrigerator works for a while, the unit will automatically control its temperature according to
the setting of the user. When the unit fully cools down, put in the food and it will fully cools down in 2 to
3 hours. In summer time, it takes at least 4 hours for the food to fully cool down. (Do not open the
refrigerator too much before the unit gets cool.)
Residual current circuit breaker: If the refrigerator is located in a moist place, make sure to check and
guarantee the grounding and the residual current circuit breaker both properly work. When the refrigerator hits
the wall or the wall gets black due to the air convection around the compressor, remove the refrigerator away from
the wall.
The setting on the refrigerator could cause noise or bad image to the nearby mobile phone, fixed line, radio and
television. Remove the refrigerator as much as possible.
★
About Freon-free refrigerator
By using Freon-free gas R600a and foaming material, this refrigerator will not damage
the ozonosphere and has little impact on the global warming.
FUNCTIONS OF THE PRODUCT
The display control panel is in the middle of refrigerator door. Please see the below for
the details:
Button instruction:
1.”Temp.Zone “button-selecting the temperature zone
2.”Temp”button-setting the temperature of refrigerator
3.”Function”button-setting the refrigerator at fast freeze or Smart status
4.”OK” button-To confirm the temperature or function status setting.
5.
When the screen lights up, if there is no touch operation, the display screen dimmed
after 3 minutes; when the display is dimmed, the first time keypad wake-up display, at
this time if you press any key in short time, the key is invalid; after the "unlock" button
3s unlocked, then press the button, then the function takes effect.
Function setting
★
First power on
When the refrigerator first power on, the control panel will back to normal display after
2 seconds.
★
Control panel operation
There is no operation on refrigerator when the door closed in 3minutes,the light of
control panel will be off
Open the door or press any button, the light will be on,
★
Setting the temperature of freezer
Press the “freezer” button can set the freezer temperature. At the first pressing, the
freezer temperature showed at blink, then to press continue, the temperature will
change 1
℃
with each pressing.
The temperature setting of freezer is circulating as below:
-24
℃
-- -23
℃
-- -22
℃
-- --21
℃
-- -20
℃
-- -19
℃
-- -18
℃
-- -17
℃
-- -16
℃
-- -24
℃
Setting the temperature of fridge
Press the “fridge” button can set the freezer temperature. At the first pressing, the
freezer temperature showed at blink, then to press continue, the temperature will
change 1
℃
with each pressing.
The temperature setting of fridge is circulating as below:
2
℃
-- 3
℃
-- 4
℃
-- 5
℃
-- 6
℃
--7
℃
-- 8
℃
-- OF-- 2
℃
The fridge is not cooling under the “OF” status.
★
Smart
Under the “Smart” status, it is 5 ℃
in the refrigerator compartment and -18
℃
in the
freezer compartment.
Pressing the “function” button until the Smart icon flashes, then click “OK” button to
enter the Smart function, and the light will be on.
Pressing the “function” button until the Smart icon flashes, then click “OK” button to quit
this function and the light will be off.
Under the fast freeze function, the refrigerator will quit Smart function.
★
Fast freeze
With this function, the food in the freezer compartment will get cold fast. Under fast
freezing function, the temperature of freezer is -32
℃。
Pressing the “function” button until the fast freeze icon flashes, then click “OK” button
to enter the fast freeze function, and the light will be on.
Pressing the “function” button until the fast freeze icon flashes, then click “OK” button to quit this function and the light will