InfinitePlay Z6001, Инструкция по установке и эксплуатации

Страница: 5 / 20

5
EN
INFINITE PLAY
SYSTEM PROGRAMMING
There are two types of configurations:
1) Using an internal video door when you first start is recommended for
small building
2) For systems of higher dimensions can be a system configuration from a
PC by software
To be connected PC to any RJ45 port of InfinitePlay system by patch
cords.
INSTALLER SETUP:
KEY PASSWORD: 000000
Setup by video door phone
VIDEO DOOR PHONE ID:
Building 01
Floor 103
Apartment 050
Internal device 04
PHASES OF CONFIGURATION:
The configuration steps of the system are divided into only 5 points
1. BASIC SETTINGS
2. ENTRANCE PANEL
3. POWER SUPPLY
4. VIDEO DOOR PHONE
5. MAPPING ENTRANCE PANEL
1. BASIC SETTINGS
To be programmed the basic parameters for system
CONCIERGE ( yes / no )
SOS PANIC BUTTON ( yes / no )
VISIBILITY SYSTEM( all video intercom device/ only master video intercom
device )
SYSTEM SETTING TIME
2. ENTRANCE PANEL
To be programmed all parameters of entrance panel in the system
IDENTIFICATION NUMBER = 1C52040001 – 1C5204NNNN
CUSTOM ID: from 1 to 200
NAME ENTRACE PANEL: Via Ferrero
ANSWER TIME (1 to 255 s)
Default value 30 s
CONVERSATION TIME (1 to 255 s)
Default value 120 s
SELF-START TIME(1 to 255 s)
Default value 30 s
AUDIO INDOOR-OUTDOOR (0% to 100%)
Default value 50%
ENTRANCE PANEL RINGTONE REPETITION ( yes / no )
SAVE SETTINGS BEFORE YOU GET OUT OF SETUP
BACK SAVE