Board Mount
Mount the PCB to the enclosure with screws. Mounting hole diameter is 3mm.
3
Mounting Diagram
35mm DIN rail mounting: Mount the sensor module onto the DIN rail (dark black) as shown in the figure.
Notes
1.
The module has the function of anti-reverse connection. But it is still necessary to pay attention to the voltage polarity when the power is turned
ON to avoid damage to the module.
2.
The modules are tested with pure resistance loads when they leave the factory. If user uses inductive or capacitive loads, there can be deviation
in the reading. Kindly contact the customer support team for assistant.
3.
When the module is connected to the computer for debugging, please use the USB to 485 modules for debugging.
