Intercom Calls
37
4.
The called station then presses the flashing intercom
button to answer the incoming intercom call. Once the
call is answered, the following message displays on the
called station LCD as shown.
Intercom Calls
Answering an Intercom Call
When your intercom button signal switch is in the:
H Mode
(No LED) -- Handsfree Mode. You will hear three
bursts of tone and an announcement. Reply handsfree or
lift handset for privacy.
P Mode
(LED Flashing) -- Privacy Mode. You will hear
three bursts of tone and a one-way announcement. The
calling party cannot hear conversations in progress.
T Mode
(LED On) -- Tone Mode. You will hear repeated
bursts of intercom tone ringing and the HOLD button will
slow flash. Lift handset or press ON/OFF button to
answer.
Intercom Transfer
Intercom transfer without DSS buttons:
1.
Receive or make an intercom call.
2.
Press the TRANS button. An intercom dial tone sounds.
3.
Dial the station where call is to be transferred.
When 2nd station answers, you are in a Supervised
Transfer mode. (1st station is staged for transfer.)
4.
Replace the handset. (Station 1 and 2 are connec ted)
CALL FR OM S TA X X X
MMM D D Y Y
H H: MM a m
