ADS-260 User Guide
19
7.2 Verification Commands
Cmd
Description
Syntax
Comments
2000 Get Device Status
cmd
2160
Get Event Log Entries
Number
cmd
2161 Get Event Log Last Entries
cmd,n
n: event log entries (0: all)
2301 Get Device ID
cmd
3160 Get Counter Settings
cmd,n
n: counter
3210 Get AI Settings
cmd,n
n: AI
3230 Get SDI AI Configuration
cmd,n
n: SDI AI
3240
Get Modbus Trigger
Command
cmd
3241 Get Modbus AI Configuration
cmd,n
n: Modbus AI
3250 Get Massa AI Configuration
cmd,n
n: Massa AI
3291 Get AI Power Up Delay
cmd
3310 Get Send Period
cmd
3600 Get Unit RTC Time
cmd
5100 Get Current AI/DI Values
cmd
8100 Set AI (IN1) Correction Factor
cmd,n,r,c
n: AI, r: real value, c: corrected
value
8270 Enter Sigfox Debug Mode
cmd,e
e: enable (0: No, 1: Yes)
8280 Send Sigfox Message
cmd,bs,sb1,...,sbN
bs: number of bytes to send,
sb1-sbN: bytes to be sent
9100 Get Correction Factor
cmd,n
n: AI
9210 Send SDI Command
cmd,s
s: SDI command string
9220 Send Modbus Command
cmd,a,c,p1,p2
a: address, c: command, p1-p2:
function dependent parameters
9225 Send Massa Command
cmd,a,rc,p1,p2
a: address, rc: request code, p1-
p2: request code dependent
parameters
9226 Get Massa Value
cmd,a
a: address
9270
Sigfox transceiver Send
Command
cmd,bs,br,sb1,...,sbN
bs: number of bytes to send, br:
number of bytes to receive, sb1-
sbN: bytes to be sent
9275
Sigfox transceiver Memory
Read
cmd,addr,num
addr: start address, num: number
of bytes to read
9276
Sigfox transceiver Memory
Config
cmd,addr,num,v1,...,vN
addr: start address, num: number
of bytes to write, v1-vN: values
