Infinite Play Series NVR, Руководство пользователя по установке и эксплуатации

Страница: 62 / 72

INFINITE PLAY
62 EN
5. FAQ
5.1 FAQ:
If the problems are not listed, please contact the local service or call the HQ service. We are willing
to offer the service.
1
、
The NVR cannot power on normally.
Possible reasons are as followed:
1 The power supply is not correct.
2 Switch power supply line is not in good connection.
3 Switch power supply is damaged.
4 The program updating is wrong.
5 The hard disk is damaged or the hard disk lines are broken.
6 The front panel is damaged.
7 The main board of the NVR is damaged.
2
、
The NVR reboots automatically or stops working after boot up a few minutes.
Possible reasons are as followed:
1 The input voltage is not stable or too low.
2 The hard disk is damaged or the hard disk lines are broken.
3 The power of the switch power supply is low.
4 Frontal video signal is not stable.
5 Bad heat radiator or too much dust or bad running circumstance for the NVR.
6 The hardware of the NVR is damaged.
3
、
System cannot detect hard disk.
Possible reasons are as followed:
1 The hard disk power supply line is not connected.
2 The cables of the hard disk are damaged.
3 The hard disk is damaged.
4 The SATA port of main board is damaged.
4
、
There are no video outputs in single channel, multiple channels and all channels.