Infinea X User Manual
Page 27 of 34
UM-00001 Version: C
CLEANING YOUR INFINEA X
Precautions
The Infinea X is certified to meet IP54 Ingress Protection Marking per IEC 60529. Per the IP54 rating,
the Infinea X is protected against interference with normal operation of the Infinea X sled caused by
dust and splashing liquids. At no time should the Infinea X sled be completely immersed in liquid. Total
submersion of the device may allow liquid to enter the unit and impair its normal function. Immersion
will also void the Infinea X warranty.
The Infinea X is molded using medical–grade materials that are formulated with an anti-microbial
additive. Please review the specifications for Silver Seal™ to ensure that the specifications are sufficient
and appropriate for the intended use and environment. The end user should determine an appropriate
cleaning procedure that complies with any facility and/or industry-specific cleaning requirements. The
following information is a general cleaning guideline that should be followed to ensure the Infinea X
maintains its normal operation.
Cleaning guidelines for the Infinea X
• Do NOT autoclave, machine wash, pressure-sterilize or gas-sterilize the Infinea X.
• Do NOT soak or immerse in any liquid.
• Clean the Infinea X only when the battery module is properly installed and locked into the Infinea
X. This will ensure proper sealing of the Infinea X prior to introducing any solutions and/or wipes
used during the cleaning process.
• Apply cleaning solutions with a soft lint-free cloth. If the solution comes in the form of a wipe,
ensure the wipe is lint-free and will not scratch the plastic surfaces (especially the scan window).
Excessive solution that resides in any of the waterproof membrane orgasket areas can seep into
the devices and cause damage to the internal components.
• Do not touch, press or rub the display and/or covers with abrasive cleaning compounds,
instruments, brushes, rough surface material or bring the display and/or covers into contact with
products that could potentially scratch the display or covers.
• To clean the Infinea X screw areas, use a soft-bristled brush with approved cleaning solutions.
Focus cleaning in the screw areas, ensuring that the brush is not used in areas that contain seals
or gaskets.
• Do not use ammonia based, petroleum-based or acetone cleaning solutions to clean the Infinea X.
Also avoid harsh solvents.
• Use the following cleaning solutions only to clean the Infinea X exterior surfaces:
• Clorox® Bleach (10%)
• Isopropyl Alcohol Wipes (70%)
