Infinea X User Manual
Page 14 of 34
UM-00001 Version: C
INSTALLING THE BATTERY PACK
Standard and Extended Battery Installation
The Infinea X is designed to support Standard and Extended external swappable battery packs. The
swappable battery pack design reduces down time of the Infinea X. Follow the steps below to install or
replace your Infinea X battery pack.
1. Check that the battery-latch is in the fully open
position.
Take care not to force the battery into place if the latch is in the close/lock position.
2. Lower the battery pack into place as
shown in the figure on the left. The
battery should sit flat when installed
correctly.
3. With slight pressure on the backside of the
battery pack, rotate the latch counter-clockwise
90-degrees or until the battery is securely locked
in place as shown in the figure on the right.
