Infinique Econo Series, Руководство по эксплуатации

Страница: 22 / 63

3.3.3 Other Icons
3.3.3.1 HDD Status
Indicates capacity of HDD and the percentage usage of HDD.
3.3.3.2 Screen Status
You can select different screen displays.
In Live MODE, there are 6 modes: PIP, POP, Sequence, Quad, 9 and 16.
Note: 9 and16 do not operate in
a 4 channel DVR.
In play mode, there are 3 display modes: Quad, 9 and 16.
Note: 9 and 16 do not operate in a 4 channel DVR.
3.3.3.3 Channel Icon
Displays the video channel number being played or in live
There are 1~4 channels in a 4ch DVR and 1~16 channels in a 16ch DVR.
3.3.3.4 USB Icon
This Icon will be shown after you attach a USB device into DVR,
3.3.3.5 Network Icon
This Icon is shown while the DVR is accessed through network using remote viewing software.
3.3.3.6 Remote Control ID Icon
This Icon will be shown if system ID has been set in the system sub-menu.
The color of number displayed will be “Yellow” in case the status is active and if the number of
remote control matches the number of system ID. Otherwise, the color will be “RED”.
If you click Remote control ID Icon, you can see the following;
Status = Active [or De-active]
SYSEM-ID = 01, Request-ID = 01
Status denotes if the DVR can be operated or not with the remote control.
SYSTEM-ID denotes the number of remote control ID of DVR.
Request–ID denotes the number of Remote control you have got.
If you like to control the DVR with the remote control, the value of SYSTEM-ID should be the same
as that of Request-ID.
Note: You should press two digits when you select System-ID. Example, for number 5, press 0
and then 5. Do not press only 5. (Please refer to page 43 for setting remote control)
3.4 Other Remote Control Functions
3.4.1 Full screen mode
- Press button. By pressing button again, screen will show the next channel.
- Press desired numeric button on the remote control to go to specific channel
3.4.2 Quad screen mode
-
To see quad screen mode, press button.
- By pressing button again, the next four channels are displayed in quad screen.
- If you press a numeric key of remote control which is inside current display range, selected
channel is displayed as full screen mode.