Infineon XMC4700, Руководство пользователя

Страница: 4 / 28

• XMC4700 Relax
• XMC4800 Relax EtherCAT
The XMC4700 Relax Kit and the XMC4800 Relax EtherCAT
®
Kit feature with an Ethernet-enabled communication
option, for example to run an embedded web server. You can store your own HTML web pages on a microSD
Card or control the XMC4700/XMC4800 via the web browser on your PC
Additional voltage level shifters and Aruino connection header on theXMC4700 Relax Kit for 5V Shields allow the
usage of Arduino shields with 3.3V or 5V logic level
The embedded web server application is not supported by the KXMC4700 Relax Lite Kit and the XMC4700 Relax
Kit for 5V Shields, because some components for example for Ethernet and SD-Card are not assembled.
The XMC4800 Relax EtherCAT
®
Kit is assembled with a XMC4800 (pin compatible to XMC4700) and comes
together with a top-mounted XMC
™
EtherCAT
®
Phy Board. It’s a complete development kit for EtherCAT slave
devices and the XMC4800 is powerful and functional enough to make this board an ideal choice for the
development engineers of EtherCAT
®
slaves such as servo drives and intelligent I/O devices.
All boards are marked with “XMC4700/XMC4800 Relax Kit Series-V1” and can be distinguished by the assembled
devices (see pictures in chapter 2). These boards are neither cost nor size optimized and do not serve as a
reference design.
1.1 Key Features
Table 2 summarizes the features of the different assembly versions of the XMC4700/XMC4800 Relax Kit Series-
V1.
Table 2
Kit Features of Assembly Versions
Feature XMC4700
Relax
Lite Kit
XMC4700
Relax Kit
for 5V
Shields
XMC4700
Relax Kit
XMC4800
Relax
EtherCAT
®
Kit
XMC4700 Microcontroller x x x
XMC4800 Microcontroller x
On-board Debug Probe with USB interface supporting
SWD + SWO
x x x x
Virtual COM Port via Debug Probe x x x x
2 x User Push-Buttons and
2 x User LED and
1 x Reset Push-Button x x x x
Voltage Regulator 5 V -> 3.3 V x x x x
USB (Micro USB Plug) x x x x
12 MHz Crystal x x x x
32.768 kHz RTC Crystal x x
Arduino compatible connector and voltage level shifter
for 3.3 V / 5 V Arduino shields
x
0 Ohm Bridges for 3.3 V Arduino shields x x x
Ethernet PHY and RJ45 Jack x x
32 Mbit Quad-SPI Flash Memory x x
(table continues...)
restricted - NDA required!
Evaluation Board for XMC4000 Family
XMC4700/XMC4800 Relax Kit Series-V1
1 Introduction
Board User Manual 4 Rev. 1.4
2022-06-20