Infineon TLE92108 APPKIT Скачать руководство пользователя страница 29

Trademarks
All referenced product or service names and trademarks are the property of their respective owners.

Edition 2020-06-30
Published by
Infineon Technologies AG
81726 Munich, Germany
 

©

 2020 Infineon Technologies AG

All Rights Reserved.
 
Do you have a question about any

aspect of this document?
Email: 

[email protected]

 
Document reference

IFX-aim1593422827821

IMPORTANT NOTICE
The  information  given  in  this  document  shall  in  no

event  be  regarded  as  a  guarantee  of  conditions  or

characteristics (“Beschaffenheitsgarantie”) .
With respect to any examples, hints or any typical values

stated  herein  and/or  any  information  regarding  the

application  of  the  product,  Infineon  Technologies

hereby disclaims any and all warranties and liabilities of

any  kind,  including  without  limitation  warranties  of

non-infringement  of  intellectual  property  rights  of  any

third party.
In  addition,  any  information  given  in  this  document  is

subject  to  customer’s  compliance  with  its  obligations

stated  in  this  document  and  any  applicable  legal

requirements,  norms  and  standards  concerning

customer’s  products  and  any  use  of  the  product  of

Infineon Technologies in customer’s applications.
The  data  contained  in  this  document  is  exclusively

intended  for  technically  trained  staff.  It  is  the

responsibility  of  customer’s  technical  departments  to

evaluate the suitability of the product for the intended

application  and  the  completeness  of  the  product

information given in this document with respect to such

application.

WARNINGS
Due to technical requirements products may contain

dangerous substances. For information on the types

in  question  please  contact  your  nearest  Infineon

Technologies office.
Except as otherwise explicitly approved by Infineon

Technologies  in  a  written  document  signed  by

authorized representatives of Infineon Technologies,

Infineon Technologies’ products may not be used in

any  applications  where  a  failure  of  the  product  or

any consequences of the use thereof can reasonably

be expected to result in personal injury.

Содержание TLE92108 APPKIT






























Отзывы: