Infineon TLE92108 APPKIT, Руководство пользователя, Страница: 13 / 29

8.3 Using the GUI
The GUI consists of three panels/tabs:
•
Motor Control
• Detailed Settings
• PWM and Diagnostic
Figure 12 TLE92108 APPKIT GUI
Additionally the status of the USB connection, bridge driver and diagnostic read is shown on the top of the
display:
Everything is up and running.
There seems to be a problem.
The GUI provides buttons to Clear Diagnosis, to Clear Status Registers and to RESET the device.
Motor Control
In this panel it is possible to:
•
Configure the PWM channels 1-3 with 0-100% DC and up to 25 kHz which are generated by the uIO-stick.
• Map the PWM to half-bridges 1-8.
• Set the HB state in either cascade or H bridge configuration.
• Select and disable the CSAs and see the current VCSOx output.
• See the General Status register and Global Status byte.
• Perform off-state diagnosis.
Detailed Settings
In this panel it is possible to:
•
Enable and configure the charge pump and set OV and UV thresholds.
• Configure passive mode settings.
• Configure the CSAs and enable OC shutdown.
TLE92108 APPKIT
8 APPKIT setup
User Manual 13 v1.0
2020-06-30