TLE9461-3ES / TLE9471-3ES Evaluation Board
Getting Started
TLE9461-3ES / TLE9471-3ES Evaluation Board
7
Rev 1.0, Dec 2018
6.2.
General Configuration: INTN and TEST pins
These jumpers are located at the left side of the board:
Figure 4: Jumpers for SBC configuration purposes
The jumper X24 allows to select the hardware configuration of the SBC (configuration 1/3 or 2/4):
X24
Config 1/3
Connect INTN and Vcc1
Config 2/4
Leave open
Table 3: X24 Cofiguration
Through the jumper X27 the operation mode of the SBC can be selected:
X27
Development Mode
Connect Vcc1 and TEST (
no need to start watchdog
)
User Mode
Leave open
Table 4: X27 Cofiguration
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
