User Guide
22 of 44
Revision 1.0
2020-05-22
EVAL-M3-302F User Guide
iMOTION™ Modular Application Design Kit
Getting started with EVAL-M3-302F
MCEDesigner programmer function can be used to program IMC302A-F064 firmware and/or system parameters.
To call up this function, click on “Tools” menu and then select “Programmer” in the pull-down list. The pop-up
window “Program IMC controller” will show up as in Figure 9.
To program both firmware and drive system parameters into IMC302A-F064 (which can happen when
programming the brand new devices with default factory settings for the first time, or when the new version of
iMOTION™ firmware is being downloaded), first click on the “Program Firmware and Parameter” radio button in
the “Program IMC controller” pop-up window. After that, select the “Drive System Parameter” file created using
MCEWizard by clicking on the “Browse…” button at the end of the “Program Parameter File” row, and then also
select the IMC302A-F064_A_Vxxx.ldf file (which was included in the “IMC302A-F064 MCE Software Package”) by
clicking on the “Browse…” button at the end of “Program Firmware File” row. Finally, click on the “Start”
button to program the parameter file into the IMC302A-F064 IC.
Figure 9
Program firmware and parameters in “Program IMC Controller” pop-up window
To program only “Drive System Parameter” file into IMC302A-F064, click on “Tools” menu and select
“Programmer” in the pull-down list. The pop-up window “Program IMC controller” will show up as in Figure 10.
Click on the “Program Parameters” button (this is the default option), and then select the “Drive System
Parameter” file created using MCEWizard by clicking on “Browse…”. Finally, click on the “Start” button to
program the parameter file into the IMC302A-F064 IC.
