Implementation
Configure and control the LEDs
Four LEDs are configured to be switched on/off by the
controlling port pins
to
which they are connected using methods from the iLLD header
IfxPort.h
.
In the setup phase, the port pins of the LEDs have to be
configured as push-
pull output
using the function
IfxPort_setPinMode()
.
If CRC calculation errors occur, the related LEDs are
switched on
using the
function
IfxPort_setPinLow()
.
6
2019-10-17
Copyright © Infineon Technologies AG 2019. All rights reserved.