user guide
31 of 38
002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Programming Operations
5.11
Program eFuse Region of PSoC™ 6 MCU
1.
Connect the device to the host computer and select it in the Probe/Kit drop-down.
2.
Select the programming file as described in the
section. The programming file
should contain valid eFuse data region (at address 0x90700000).
3.
Select the Program Security Data check box under Program Settings.
4.
5.
Click the
Program
button.
CYP programs the device and displays various messages in the
Log
. Then, a message in the Status Bar indicates
that the device was programmed successfully or that an error occurred.
If some eFuse bits have been already programmed before, a warning message "The efuse bit at address xx has
been already blown" appears in
Log
.