user guide
22 of 38
002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Programming Operations
4.
CYP queries the JTAG chain and displays detected devices under the
JTAG Chain
option in
Probe Settings
.
The list of devices in the chain contains target names for supported devices and ID codes for those which
are not supported.
5.
Select the desired target device in the list by clicking the radio button next to the target name.
6.
Select the programming file as described in the
section.
7.
Click
Connect
. CYP communicates with the device and displays various messages in the
Log
. Then, a
message in the Status Bar indicates that it is connected.