CPU_42A-V1
CPU Board XMC4200 Actuator
Overview
Board User's Manual
7
Revision 1.0, 2013-02-19
Introduction
This document describes the features and hardware details of the CPU Board XMC4200 Actuator (CPU_42A-
V1) design
ed to work with Infineon’s XMC42
00 Microcontroller. This
board is part of Infineon’s
Hexagon
Application Kits.
1
Overview
The CPU board CPU_42A-V1 houses the XMC4200 Microcontroller and the ACT satellite connector for
application expansion. The board along with satellite cards (e.g. AUT_ISO-V1, MOT_GPDLV-V2 boards)
demonstrates the capabilities of XMC4200. The main use case for this board is to demonstrate motor control
and power conversion features of the XMC4200 device including tool chain. The focus is safe operation under
evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design.
1.1
Key Features
The CPU_42A-V1 board is equipped with the following features
XMC4200 (ARM
®
Cortex
™
-M4-based) Microcontroller, 256 kByte on-chip Flash, QFN-48
Connection to satellite cards via the ACT satellite connector
USB Device support via micro USB connector
CAN Transceiver with CAN Connector (SUB-D, DE-9 male)
Debug options
- On-board Debugger via the Debug USB connector
- Cortex Debug connector 10-
pin (0.05”)
- Cortex Debug+ETM connector 20-
pin (0.05”)
Reset push button
Boot from Embedded Flash or CAN
PowerScale Connector: Ready for power consumption analysis
6 LED
’
s
- 3 Power indicating LEDs
- 1 User LED (P2.1)
- 1 RESET LED
- 1 Debug LED
User button connected to P14.7
Potentiometer, connected to analog input P14.4
Power supply
- Via Micro-USB connector
- Via satellite connector pins (ACT satellite cards can supply power to CPU board)
- Via Debug USB connector (Micro USB)
- RTC backup battery
