2
tina14e1-a (2017-12) PEG100.om
In all communications with INFICON, please specify the information on the product
nameplate. For convenient reference copy that information into the space provided
below.
This document applies to products with part numbers
351-000
(PEG100,
DN 25 ISO-KF)
351-002
(PEG100,
DN 40 CF-F)
The part number (No:) can be taken from the product nameplate.
We reserve the right to make technical changes without prior notice.
All dimensions in mm.
The references to diagrams, e.g. (4/1), consist of the fig. no. and the item no. in
that order.
The Penning Gauge PEG100 has been designed for vacuum measurement of in
the pressure range of 1×10
-9
to 1×10
-2
mbar.
The Penning Gauge PEG100 is a compact active pressure converter housing a
Penning measurement system as well as the corresponding operating electronics.
They have been developed specifically for integration into vacuum systems and
offer a measurement range from 1×10
-9
to 1×10
-2
mbar.
The gauge is connected directly to the vacuum system through its DN 25 KF or
DN 40 CF flange.
The electrical connection is provided through a screened 8-pin FCC 68 connector.
Unpack the PEG100 immediately after delivery, even if it is to be installed at a later
date.
Examine the packaging for any external damage. Completely remove all packaging
materials.
Retain the shipping container and the packaging materials in the event of com-
plaints about damage.
Check that the PEG100 is complete and carefully examine the gauges visually.
If any damage is discovered, report it immediately to the forwarding agent and in-
surer. If the damaged part has to be replaced, please get in touch with the orders
department.
Product Identification
Validity
Intended Use
Description
Unpacking and Checking
