Inficon Ecotec E3000, Техническое руководство

Страница: 93 / 146

Equipment Settings
4-35
ki
n
a
22
e c
h
ap
te
r 4
.fm
te
chn
ica
l ha
nd
boo
k
(1
20
6)
View error list
In the
ERROR LIST
all errors (and warnings) that have occurred during the operation
of the Ecotec E3000 are summarized.
In the list the
DATE
and
TIME
when the error occurred is stated followed by error or
warning number (
E X
being errors and
W X
being warnings) with a short description
of the error or warning.
The full error message or warning may be displayed when scrolling to the appropriate
line item and pressing the magnifying glass button.
Calibration history
In this listing all calibrations that were conduced during the operation of the Ecotec
E3000 are collected.
The
DATE
&
TIME
the calibration was performed, the
TYPE
of calibration (internal or
external), which
GAS
number (in gas of external calibration) as well as the calibration
factor are listed.
Each line may be viewed by pressing the
VIEW
(magnifying glass icon) button.
If you view an external calibration the following information will be displayed:
• The calibration mode (internal or external)
• The gas that was calibrated (gas number, mass position, gas name in case of
external calibration / gas numbers) in case of internal calibration)
Fig. 4-25 Example of an Ecotec E3000
ERROR HISTORY LIST
Fig. 4-26 Example of an Ecotec E3000
CAL IB RATION HISTORY