manualshive.com logo in svg

Inficon 580-000, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Inficon 580-000 Скачать руководство пользователя страница 35

INFICON

Getting started | 5

IRwin-Operating-instructions-mina66en1-15-(1904)

35 / 128

5 Getting started

5.1 Charging the battery

 WARNING

Explosion hazard

The equipment for charging IRwin is not ATEX certified/ex-protected.

► Never charge IRwin (all models) in potentially explosive atmospheres.

 WARNING

Using the wrong charger could damage the explosion protection of IRwin

SXnn models.

The only equipment allowed to be connected to the Charging socket of any of the

IRwin SXnn models is the Ex Certified IRwin Charging Adapter. Connect this adapter

to the leak detector first and then connect the charger or car cable to the adapter.

NOTICE

Fast charging reduces the lifetime of the battery.

► Do not use fast charging regularly.

► The ambient temperature during the charging process should be between 10 and

30 °C.

Содержание 580-000

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды