1. Lay strap across base ensuring that
it sits neatly in recesses on each side
of the base (Fig. 2).
2. Place remaining seat base on top of
first section with both fronts facing
the same direction and align screw
holes on each side. Screw 4 x long
screws into holes provided on both
sides of the seat (Fig. 3).
3. Screw remaining 1 x short screw into
the hole at the front of the seat (Fig. 4).
4. Clip screw cover strips into place,
on both sides of the seat (fig. 5).
Your booster seat is now ready for use
ASSEMBLY INSTRUCTIONS
Never leave child without adult attendance.
Ensure security strap is attached firmly to a stable chair which has a suitable surface area to seat the booster seat.
Ensure the chair is always on level, stable surface.
Check the booster seat regularly for any loose or worn parts, and if needed, contact the InfaSecure Customer Service Centre,
for repairs or replacements, before further use.
SAFETY WARNINGS
InfaSecure Warranty Details
InfaSecure Pty Ltd warrants this product for twelve months from the date of
purchase against failure due to manufacturing faults or faulty materials. Misuse,
accidental damages, normal wear and tear are not covered by this warranty.
When used for commercial use the period is limited to six months.
“Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.”
Fig. 1
Fig. 2
Fig. 4
Fig. 3
Fig. 5
