4. Lift chair onto top of the table and
align each of the 4 legs onto the
corresponding holes in the table.
Press spring on short tubes A, push
into location hole on table [Figure 4].
Check that it has locked in position.
Repeat for the opposite corners.
(Note: To remove high chair off table,
release the 2 spring clips and lift off.)
Figure 4
Figure 5
5. Position cover onto seat body and
allign so that holes are in line with the
harness slots [Figure 5].
6. Insert each harness part into the
alligning holes, push shoulder straps
and clips through until the clip
protrudes out the back slot of the
seat. Pull on strap to check it is held
in place. Repeat for waist straps and
crotch strap [Figure 6].
7. Make sure harness is fully assembled.
Check the buckle parts click together
[Figure 7]. Also ensure that straps are
not twisted.
Figure 6
A
B
A
B
Figure 7
5
