Infasecure CS4210, Инструкция по эксплуатации

Страница: 16 / 48

Place the child restraint on the vehicle seat. Ensure
recline section is swung forward and the restraint is
fully reclined with the restraint directly in line with
anchorage point.
Make sure upper anchorage strap is as in illustration
(Figures 1 and 2) i.e. positioned around restraint
back.
Feed adult lap or lap/sash belt through the belt path
opening, ensure the seat belt is under the cover &
between the layer of foam and the plastic seat base.
Engage the buckle and tongue assembly (listen for a
“CLICK” ). Check the buckle engagement with a
gentle pull.
Step 1:
Step 2:
Step 3:
INSTALLING IN VEHICLE
Figure 2
Recline Section (Swung Forward)
& child restraint fully reclined.
IMPORTANT
!
Ensure that you use the
REARWARD-FACING
BELT PATH
indicators, marked in “blue”.
Front
of Car
Lap Belt &
Sash Belt Passes
Through Here
Buckle &
Assembly
Upper
Anchorage
Strap
Safe Grip
(red belt clamp)
Seat
Belt
Figure 1
Recline Section
INF
ANT
WITH INBUIL
T HARNESS
INSTALLATION
DO NOT USE REAR FACING CHILD RESTRAINT WHERE AN AIRBAG IS FITTED IN
FRONT OF THE SEATING POSITION.
Fit the restraint firmly to the car seat.
THIS TETHER STRAP MUST ALWAYS BE FITTED WHEN THE CHILD RESTRAINT IS
USED IN A VEHICLE.
WARNING
!
15