infaco electro'flor, Руководство пользователя

Страница: 11 / 20

SAFETY INSTRUCTIONS
N.B. To reduce the risk of electric shock, injury and fire when using electrical tools, please
observe the following basic safety rules. Read and follow these instructions before you
use the tool and keep these safety instructions!
Disconnect socket No. 4 for all operations other than flower removal.
When not being used for thinning operations, the ELECTRO’FLOR should be stored in its
packing tube and the battery waistcoat should be kept in its carry-case.
The ELECTRO’FLOR must be disconnected at rear socket No. 4 for the
following operations:
- When you are putting on the battery waistcoat or taking it off.
- When you are changing a wire on the brush.
- For all repair and maintenance work on the machine.
Always keep your hands away from the rotating brush when the machine is in
operation.
Never leave your battery on charge for more than 15 hours.
Do not work with the machine if you are tired or if you don’t feel well.
Wear non-skid shoes.
Do not leave the machine within the reach of children or visitors.
Do not use the machine if there is a risk of fire or explosion, e.g. the presence
of inflammable liquids or gases.
Never carry the charger by its cable and do not pull on the cable to remove
the plug.
Keep the cable away from heat, oil and cutting edges.
Never place the charger in contact with water.
Never use the machine at night or in poor light without setting up extra lighting.
When using the machine, keep both feet firmly on the ground and stay as well balanced
as possible.
N.B. the pole and brush are made of carbon, which conducts electricity.
Do not use the machine near sources of electricity or electrical wires.