C-COM Satellite Systems Inc.
Page 112 of 164
7000 Series Controller Power Output Range Option Capabilities:
13, 14, 18, 19 V @
500mA (max)
If the user chooses to power the LNB from the controller, he/she should verify the
power/voltage range requirements of the LNB in use, and configure the iNetVu
®
7000
Series Controller according to those power/voltage requirements.
Beam ID. (IDirect Ku modem)
Allows Multiple Ku Beam switching using a single modem. The Beam ID(s) are read
from the modem option file along with the Longitude and Frequency values, other
information will need to be entered manually. A customized configuration file will auto fill
all the required parameters for the available beams. The available Beams will then be
listed under the Beam ID drop down field. Parameters can be overwritten only from the
controller front panel if desired but will default back after the modem resets.
TR No. (Transponder Number)
There are Six (6) Transponder values in the 7000 Series Controller for each satellite.
Transponder 0-2 (TR0_H – TR2_H) are horizontal receive
Transponder 3-5 (TR3_V –TR5_V) are vertical receive.
The user may override the default values saved in the controller with his/her transponder
information (frequency, symbol rate, FEC rate)
DVB Type
This drop down menu allows for the configuration of the DVB carrier to search for.
There are currently two options DVB-S1 and DVB-S2 ACM.
Frequency (KHz), Code Rate, Symbol Rate (Ksps)
The frequencies listed are in Ku-band.
The user may select from the six (6) available transponders saved in the 7000 Series
Controller, which are specific to each satellite, or he/she may also enter valid
transponder data manually.
DVB will base satellite acquisition on three satellite transponder parameters, them being:
Frequency 1 (KHz)
Ku-Band Receive Frequency
Symbol Rate 1 (Ksps)
Symbol Rate of receive signal
Code Rate (DVBS1 Requirement)
FEC Rate of receive signal
