Components
Pondweg 7 | 2153 PK, Nieuw-Vennep | The Netherlands | +31 252 744044 | [email protected] |
Components
§
P551087 - Spider RFID Reader Cardboard box
§
200000 - Spider RFID Reader
§
Spider RFID Reader Core Housing Top
§
Spider RFID Reader Antenna Board I
§
Spider RFID Reader Antenna Board II
§
Spider RFID Reader Core Housing Bottom
§
P120647 - External Spider RFID Reader Braille RFID Foil
§
P551364 - Spider RFID Reader Serial Stickers | Desktop sticker | EDP Sticker |
2x QR Serial sticker
Check Components
Please check if all the components are in the set before you continue with the installation and set-up.
Some parts may already have been pre-assembled
Software
For the Spider RFID Reader there is are tools available each with its specific features. Connect the Spider RFID
Reader to a computer or laptop and present a card to the reader. Please note that the reader needs to have
the HID RAW Configuration. (See Inepro SCR-MCR-DCR RFID Programmer Tool Full Version manual for more
details).
Inepro SCR-MCR-DCR Programmer
With this tool it is possible to change the behaviour of the card reader, by creating or editing it's configuration
file. For example it is possible to change the read out of the RFID card but also the LEDs can be switched off or
the volume of the beeper can be changed. Once finished it is possible to store the created settings in a special
config file which can be programmed via the SCR-MCR-DCR RFID Programmer Tool. For more information
regarding this SCR-MCR-DCR RFID Programmer Tool please consult it's user manual. This tool was developed
