Inepro DMMetering PRO1 V11 Series, Руководство пользователя

Страница: 4 / 16

®
2011 - 4 - For the SOP number see section 15 PRO1 V11.xxx
Exclusion of liability
We have checked the contents of this manual and every effort has been made to ensure that the
descriptions are as accurate as possible. However, deviations from the description cannot be
completely ruled out, so that no liability can be accepted for any errors or omissions in the
information given. The data in this manual are checked regularly and the necessary corrections will
be included in subsequent editions. If you have any suggestions, please do not hesitate to contact
us.
Subject to technical modifications without notice.
Copyright
Copyright Inepro Metering June 2011. All rights Reserved.
It is prohibited to pass on or copy this document or to use or disclose its contents without express
permission of Inepro Metering BV. Any duplication is a violation of the law and subject to criminal
and civil penalties. All rights reserved, particularly for pending or approved patent awards or
registered trademarks.
Registered trademarks
DMMetering
®
is a registered trademark of Inepro Metering BV – member of the Inepro Group.
Other names appearing in this manual may be trademarks of third parties and are property of their
respectful owners.
2 Foreword
Thank you for purchasing this energy meter. Inepro has a wide product range of devices. We have
introduced a large number of energy meters on the market suitable for 110V AC to 400V AC (50 or
60Hz). Besides the normal energy meters we also developed our own pre-paid meters with chip
card, chip card re-loaders and a complete PC management control system. For more information
on other products please contact our sales department at sales@ineprometering.com or visit our
website at www.ineprometering.com.
Although we produce this device according to international standards and our quality inspection is
very accurate it’s still possible that this device shows a defect or failure for which we do apologize.
Under normal conditions your product should give you years of trouble free operation. In case
there is a problem with the energy meter you should contact your distributor immediately. Most of
our energy meters are sealed with a special seal. Once this seal is broken there is no possibility to
claim any warranty. Therefore NEVER open an energy meter or break the seal of the device. The
warranty period is 3 years after production, and only valid for production faults.