![iNels RFDSC-71N Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/inels/rfdsc-71n/rfdsc-71n_manual_2054426005.webp)
R
L
C
LED
ESL
RFDSC-71N
Dimming socket
EN
02-156/2021 Rev.0
Made in Czech Republic
5/8
5
PROG
<
1s
1 x
After the desired time has
elapsed, the timing mode
ends by pressing the but-
ton on the RF transmitter, to
which the sunrise function is
assigned. This stores the set
time interval into the socket
memory.
Press of programming button
on socket RFDSC-71N shorter
then 1 second will fi nish pro-
gramming mode. The LED
lights up according to the pre-
set memory function.
4
1 x
t = 2s . . . 30min.
1 x
Function sunset /
Description of sunset function /
After pressing the programmed button, the light begins to dim in the pro-
grammed time interval in a range of 2 seconds to 30 minutes.
1
PROG
>
1s
1 x
2
4 x
3
PROG
<
1s
1 x
Programming /
Press of programming but-
ton on socket RFDSC-71N for
1 second will activate socket
RFDSC-71N into programming
mode. LED is fl ashing in 1s in-
terval.
Four presses of your selected
button on the RF transmitter
assigns the function light scene 4
(must be a lapse of 1s between
individual presses).
Press of programming button
on socket RFDSC-71N shorter
then 1 second will fi nish pro-
gramming mode. The LED
lights up according to the pre-
set memory function.
1 x
3
PROG
>
5s
1 x
2
5 x
1
PROG
>
1s
1 x
Function sunrise /
Description of sunrise function /
After pressing the programmed button, the light begins to illuminate in the pro-
grammed time interval in a range of 2 seconds to 30 minutes.
Programming /
Press of programming but-
ton on socket RFDSC-71N for
1 second will activate socket
RFDSC-71N into programming
mode. LED is fl ashing in 1s in-
terval.
Assignment of the sunrise func-
tion is performed by fi ve presses
of the selected button on the RF
transmitter (must be a lapse of
1s between individual presses).
Press of programming button
longer then 5 seconds, will
activate socket into timing
mode. LED fl ashs 2x in each
1s interval. After releasing the
button, the time of the sun-
rise function begins to count
down (period of complete il-
lumination of the light).
Utičnica za preklapanje
RS
www.elkoep.com
ELKO EP, s.r.o. | Palackého 493 | 769 01 Holešov, Všetuly | Česká republika | e-mail: [email protected]
EN
Support: +420 778 427 366 |
CZ
Technická podpora: +420 775 444 609
Nakon odbrojavanja želje-
nog vremena se isključi režim
tajmera pritiskom tastera na RF
kontroloru kojemu je pridruže-
na funkcija izlaska sunca. Tako
se podešeni vremenski interval
pohrani u memoriju utičnice.
Programiranje se isključuje pri-
tiskom na programirani taster
na utičnici RFDSC-71N koji je
kraći od 1 sekunde. LED svetli
prema podešenoj memorijskoj
funkciji.
Funkcija zalazak sunca
Opis funkcije zalazak sunca
Nakon pritiska na programirani taster osvetljenje polagano počinje da se gasi u
programiranom vremenskom intervalu u rasponu od 2 sekunde do 30 minuta.
Programiranje
Pritiskom na programirani
taster na utičnici RFDSC-71N u
trajanju od 1 sekunde utičnica
se prebacuje u režim za pro-
gramiranje. Crveno LED tre-
peri u intervalu od 1 sekunde.
Sa četiri pritiska tastera koji oda-
berete na RF kontroleru njemu
se pridruži funkcija svetlosna
scena 4 (između pojedinačnih
pritisaka mora da bude pauza
od 1s).
Pritiskom na programirani tas-
ter na utičnici RFDSC-71N na
vreme kraće od 1 sekunde se
isključi režim za programiran-
je. LED svetli prema podeše-
noj memorijskoj funkciji.
Funkcija izlazak sunca
Opis funkcije izlazak sunca
Nakon pritiska na programirani taster osvetljenje polagano počinje da svetli u pro-
gramiranom vremenskom intervalu u rasponu od 2 sekunde do 30 minuta.
Programiranje
Pritiskom na programirani tas-
ter u trajanju od 1 sekunde na
utičnici RFDSC-71N utičnica
se prebaci u režim za progra-
miranje. Crveno LED treperi u
intervalima od sekunde.
Željeno pridruživanje funkcije
izlaska sunca izvrši se sa pet
pritisaka odabranog tastera na
RF kontroleru (između pojedi-
načnih pritisaka mora da bude
pauza od 1s).
Pritiskom na programirani
taster dužim od 5 sekundi
utičnica se prebacuje u režim
tajmera. Crveno LED dva puta
zatreperi u intervalima od
sekunde. Nakon puštanja tas-
tera počinje da se odbrojava
vreme funkcije izlaska sunca
(vreme potpunog rasvetljava-
nja svetiljke).