PROGRAMMING
Press the keys and simultaneously to enter „OPTIONS” menu.
•
"Programs"
– programmes used for automatic operation at set time;
•
„Names”
– name edition;
•
„Clock”
– clock settings (date and time).
•
,,Partial”
– gapping settings (partial opening)
•
,,Other”
– display settings
To select menu position use „
▲
” and „
▼
”. To confirm press or press to cancel.
Setting names of drives or drive groups
A text consisting of up to 16 characters (capital letters or digits) in two lines (8 characters in each line)
can be assigned to each channel number. To enter an edition mode, press the keys simultaneously.
Underlining (cursor) indicates the character position which can be changed with the keys
▲
and
▼
. The
keys
◄
,
►
change the cursor position. Press STOP to delete a character in a given position. The edition
is finished after pressing , which will save the changes, or ,which will cancel the changes.
Clock setting
After entering the option „Zegar” (clock) the display will show programme name, weekday, date(day,
month and year) and time (hour, minutes and seconds). Use „
▲
” and „
▼
” to change (set) the position
which is showed by cursor (underlined). The keys
◄
,
►
change the cursor position. You can set a day of
the week, calendar day, month, year, hour and minutes. Changes are confirmed with .
As soon as changes are confirmed, seconds are set to zero. Change can be cancelled with .
Programme setting
The option “Progr” is used to set and change programmes for automatic opening and/or closing of
specified roller blinds or roller blind groups at defined time and on defined weekdays. There are 32
programmes available with numbers from 00 to 31, which can be set as “active” or “not active”.
Weekdays during which a given programme is to be active are set by entering starting day and last day
inclusive. For example: Mon-Mon means only Monday, Sat-Sun means Saturday and Sunday, while
Mon-Sun means all weekdays. The time of programme operation is set by entering hour and minutes.
Minutes can be set only as a multiple of 5. In order to fully set the programme specify the number from
00 to 99 and the task which is to be performed opening “Up”, closing “Dn” or partial ”Part”. Settings are
made using „
▲
” and „
▼
” keys. You can change the position which is indicated by cursor (underlined).
Cursor position is changed using „
◄
” and „
►
”. Press „STOP” to move cursor to the programme number.
By changing the programme number, all changes introduced in the current programme are saved. By
pressing changes are saved in the programme and the programming mode is closed. When you press
the programming mode is closed without saving the changes introduced in a previously displayed
programme.
NOTE!!!
Times of sets programs have to be different (time of closing or opening two or more roller blinds
cannot be the same). If we want to set the same time to many roller blinds then we have to create
from them a group.
Partial
Partial is a function allowing for automatic partial opening of roller blind.
Settings:
Numb.:00 (number of roller blind or group from 00 to 99)
Value.:00 (time of work from 00s. to 15s.)
Display settings
Bright. 08 (brightness setting from 00 to16)
Flash 30 (frequency of display blinking from 00 to 60 s. –blinking is visible only when RCU is in sleep
mode)
NOTE!!!
After the battery replacement the unit looses all simplified mode settings (which should be
reprogrammed), however, texts under controller/group numbers are saved.
