11
Underwater CCTV Camera Manual
Change Web Port
RTSP settings
NETWORK setting
•
Click PORT in the NETWORK item
→ go to Web Port
•
The default setting of Web Port is as shown in the figure.
•
The HTTP port is for web access, video streaming, and playback.
•
The HTTP port is the network port that the PC uses to access
the product's web page, and can be used by specifying a port
in the range of 80 to 65535. The default is 80.
•
The above setting can be changed by the user,
but the port is a general setting, so the manufacturer is not
responsible for any problems caused by the change.
•
Click RTSP / ONVIF in the NETWORK item
→ move to RTSP Port
•
The default setting of RTSP is as shown in the figure.
•
Real-time Streaming Protocol (RTSP) is a protocol used to
transmit video and audio streams over a network.
•
The above setting can be changed by the user,
but it is a port of general setting, so the manufacturer is
not responsible for any problems caused by the change.
RTSP ADDRESS
•
The RTSP address is as follows. (General use)
- MAIN Stream (Channel 1) : rtsp://camera IP/stream1
- SUB Stream (Channel 2) : rtsp://camera IP/stream2
