Industrial Shields ESP32, Руководство пользователя

Страница: 7 / 55

Rev. 1: 13-04-2021
6
Intended use or of Industrial Shields products
Consider the following:
Industrial Shields products should only be used for the cases of application foreseen in
the catalogue and the associated technical documentation. If third-party products and
components are used, they must have been recommended or approved by Industrial
Shields.
The correct and safe operation of the products requires that your transport, storage,
installation, assembly, operation and maintenance have been carried out in a correct It
must respect the permissible ambient conditions. You should also follow the indications
and warnings that appear in the associated documentation.
The product / system dealt with in this documentation should only be handled or
manipulated by qualified personnel for the task entrusted and observing what is
indicated in the documentation corresponding to it, particularly the safety instructions
and warnings included in it. Due to their training and experience, qualified personnel
are in a position to recognize risks resulting from the handling or manipulation of such
products / systems and to avoid possible hazards.
Disclaimers
Weights and Dimensions
Dimensions and weights are nominal and they are not used for manufacturing
purposes, even when tolerances are shown.
Performance Data
The performance data given in this manual is provided as a guide for the user in
determining suitability and does not constitute a warranty. It may represent the result of
INDUSTRIAL SHIELDS’s test conditions, and the users most correlate it to actual
application requirements. Actual performance is subject to the INDUSTRIAL SHIELDS
Warranty and Limitations of Liability.
Errors and Omissions
The information in this document has been carefully checked and is believed to be
accurate; however, no responsibility is assumed for clerical, typographical, or
proofreading errors, or omissions.
The control and drive components of an Industrial Shields PLC are approved for
industrial and commercial use in industrial line supplies. Their use in public line
supplies requires a different configuration and/or additional measures. These
components may only be operated in closed housings or in higher-level control
cabinets with protective covers that are closed, and when all of the protective devices
are used. These components may only be handled by qualified and trained technical
personnel who are knowledgeable and observe all of the safety information and
instructions on the components and in the associated technical user documentation.