Industrial Rivet & Fastener Co. RK-797 Series, Руководство пользователя

Страница: 23 / 32

19
5.3 Approved Lubricants
The tool must not be cleaned with fat-solvent agents or water.
5.4 Removing the Nose Assembly
 Remove the outer sleeve.
 Remove the nose assembly
 Disassemble and clean the nose assembly according to manufacturer
instructions.
 Clean with mineral based cleaning agent and check wear off all components.
 Replace as necessary and re-install in the reverse order
5.5 Cleaning the Jaws

Clean with mineral based cleaning agent and check wear off all components.
Warning!
The proper nose assembly must be selected for the lockbolt specified.
Contact your RivetKing® representative for assistance.