INDUSTRIAL MAID AZTech RH 60 Series Скачать руководство пользователя страница 3

3

SAFETY

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE INSTALLING, 

OPERATING OR SERVICING YOUR AIR CLEANER. IT IS THE USER’S RESPONSIBILITY TO 

BECOME FULLY AQUAINTED WITH THE CONTENTS OF THE MANUAL AND THE PROPER 

OPERATION OF THE EQUIPMENT PRIOR TO USE.

Follow all building and safety codes when installing this equipment.  Pertaining but not limited to, 

the Occupational Safety and Health Act (OSHA),  National Electric Code (NEC), Uniform Building 

Code (UBC), National Fire Prevention Act (NFPA) & all state and local codes.  

 

All electrical connections should be performed by a qualified electrician. 

 

Keep Flammable Objects away from the air cleaner and under no condition should a burning 

object be allowed into the air cleaning system. 

 

Do not mix materials collected in your Air Cleaner.  Materials collected could create a hazardous 

environment or a condition of operation for which the equipment was not intended.  The 

Manufacturer is relieved of any liability if this unit is not used according to this manual. 

 

Do not use the air cleaner for an application other than for which it was intended.  Consult your 

distributor, Applicable Codes, or call Industrial Maid for application assistance. 

 

Fire protection is not included. Please consult your local fire protection specialist for any required 

extinguishing equipment. 

 

Consult with your insurance underwriter about any other protection from fire damages. 

 

The Manufacturer reserves the right to make design changes which may improve the air cleaner. 

 

This unit is intended for use to collect weld fume, dust, smoke and other airborne pollutants in 

industrial and manufacturing Facilities .  Do not use for the collection of flammable or explosive 

metals, dusts, fumes or other potentially hazardous materials.

INSPECTION

Upon receiving your Industrial Maid air cleaner, please inspect for any damage incurred during 

shipment. Inspect carefully; some damage may not be noticeable until the unit is installed. Notify 

your shipper of any damage immediately. Claims must be filed with the shipper within 15 days. 

Freight damage claims are the responsibility of the purchaser.

Содержание AZTech RH 60 Series



























Отзывы: