Indumicro IMP-A120, Руководство пользователя

Страница: 34 / 54

2
.10 Set Administrator/User Password
When selecting this feature, the following information will be shown:
Type the password with up to 8 characters and then press the <Enter> key. This will clear all
previously typed CMOS passwords. You will be requested to confirm the password. Type the
password again and press the <Enter> key. You may press <Esc> to abandon password entry
operation.
To clear the password, just press the <Enter> key when password input window pops up. A
confirmation message will be shown on the screen as to whether the password will be disabled.
You will have direct access to BIOS setup without typing any password after system reboot once
the password is disabled.
Once the password feature is used, you will be requested to type the password each time you
enter BIOS setup. This will prevent unauthorized persons from changing your system configurations.
Also, the feature is capable of requesting users to enter the password prior to system boot to
control unauthorized access to your computer. Users may enable the feature in Security Option of
Advanced BIOS Features. If Security Option is set to System, you will be requested to enter the
password before system boot and when entering BIOS setup; if Security Option is set to Setup, you
will be requested for password for entering BIOS setup.
Phoenix – AwardBIOS CMOS Setup Utility

Standard CMOS Features Load Fail-Safe Defaults
 Advanced BIOS Features Load Optimized Defaults
 Advanced Chipset Features Set Administrator Password
 Integrated Peripherals Set User Password

Power Management Setup Save & Exit Setup
 PnP/PCI Configurations Exit Without Saving
 PC Health Status
ESC : Quit
   
: Select Item
F10 : Save & Exit Setup

Change/Set/Disable Password
Enter Password:
Chapter 2 : BIOS Setup
IM P -A 1x 0 T User Manual
3 1