Indumicro IMP-A120, Руководство пользователя

Страница: 30 / 54

2
.7 PnP/PCI Configurations Setup
This part describes configurations to be made on PCI bus system. PCI, namely Personal Computer
Interconnect, is a computer bus that allows I/O device to operate nearly as fast as CPU in its own
way. Some technical terms will be mentioned here. We recommend that non-professional users not
make changes from factory default settings.
Init Display First
PCI Slot (default) PCI display device
Onboard
PCiEx
Reset Configuration Data
Normally, you should set this item to Disabled. If you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the operating system cannot boot up, then
Onboard display device
PCIE device)
Chapter 2 : BIOS Setup
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Init Display First [ PCI Slot ] Item Help
Reset Configuration Data [Disabled]
Menu Level 
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter
PCI/VGA Palette Snoop [Disabled]
** PCI Express relative items **
Maximum Payload Size [128]








 :Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

select Enabled. This will reset the Extended System Configuration Data (ESCD) after exiting from
Setup. Options are: Enabled and
Disabled (default).
Three options are available:
IM P -A 1x 0 T User Manual
27