- 7 -
6. Installation
IND induction cooker series are of plug & play type, which is ready for use after power and
water supplies (if necessary) are connected.
6.1 Heat Radiation Requirements
Adequate space shall be left in the back and bottom of the unit to allow free flow of air.
Improper installation will result in blockage or decrease of airflow and poor radiation of
heat;
The air inlet and outlet should be at least 100mm from any peripheral object (such as
wall and floor);
The inlet cold air should not be mixed with the outlet hot air;
The inlet air temperature should not exceed 40
℃
;
The induction cooker should be away from other heat sources (such as gas cooker or
halogen stove). In case several induction cookers are used, they should be at least
100mm apart from each other. Besides, it should be ensured that there is sufficient
supply of cold air and the hot air discharged by cookers will not enter other cookers.
6.2 Fire Prevention
All objects in contact with the cooker should be made of noninflammable materials.
6.3 Requirements on Electrical Connection
Check and make sure that the power supply is consistent with the rating on the
nameplate of the product;
The electrical connection must comply with existing national and local regulations;
The electrical cable of the product must be connected to the power supply with an
appropriate Circuit breaker(The circuit limitation should be 1.5-2 times of the rating
current. e.g.: 3RV6021-4CA10, 11kW, 22A, Siemens).
