- 12 -
8.1 Installation
Open the package and make sure that the appearance of the unit is in good condition.
Place the unit at the installation place. Pay attention to the ventilation conditions.
The cable should be connected to the power through plug or circuit breaker, and
connection should be conducted according to the labeling: the yellow/green terminal is
ground, the blue terminal is Neutral wire, and the other three are the three phases. All
connections must be secure.
8.2 Operation Instructions
After the device is powered on and there is no abnormal indication, it is ready for use.
Operate according to the following steps:
①
Place a pan which is recommended by the manufacturer on the cooker, and add
appropriate amount of water.
②
Connect the cooker to the power supply.
③
Switch on the power, the indicator will go on.
④
Depending on the food to be cooked, turn the knob slowly to an appropriate position. A
corresponding number will be shown on the indicator.
⑤
After use, turn the handle to “0” and cut off the power.
9. Cleaning & Maintenance
Clean the glass-ceramic panel surface in the same way as to glass. Do not use corrosive or
grinding cleaners such as grill spray, detergent powder, deruster, polishing powder or
coarse sponge to clean the panel.
To prevent scalding, do not clean the panel when the surface is hot.
WARNING: The induction cooker must be disconnected from power supply during clearing
and maintenance.
