HD-TVI DVR User Manual
21
Note:
Prior to setting motion detection field it is recommended that you click
icon to clear the existing field and set afresh.
⑦
Select “All” to set the same settings for all channels.
⑧
Click “Apply” button to save the setting.
⑨
Go to Schedule tab. The setting steps for schedule for motion based alarm are similar to
normal schedule setup (see Chapter 4.4.1 for more details).
4.5.2 Video Loss
This DVR can be set up to detect video loss. The setting steps are as follows:
①
Go to Main Menu
Setup
Alarm
Video Loss. Refer to Fig 4-19:
②
The setup steps of video loss trigger are similar to motion trigger setting. (See Chapter
4.5.1 Motion
Trigger setting for more details).
Fig 4-19 Alarm Configuration-Video Loss
4.5.3 Other Alarm
This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect event,
Disk Attenuation or Disk Lost.
①
Go to Main Menu
Setup
Alarm
Other Alarm. Refer to Fig 4-20:
②
Use the dropdown menu and select the event or the alarm.
③
Check the required trigger options.
④
If the selected event is “Disk Full”, then use the drop down box for “Disk Shortage
Alarm” to choose a threshold value for remaining HDD space. If the threshold value is
reached, the system will trigger the Disk Full Alarm.
⑤
Click “Apply” to save the setting.
