ANT+ CONSOLE
Copyright by Indoorcycling Group GmbH 2013 | www.indoorcycling.com
03
EN
G
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions:(1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation. This equipment
has been tested and found to comply with the limits
for a Class B digital device, according to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and if not installed and used in accordance
with the instructions, may interfere with radio
communications. However, there is no guarantee
that interference will not occur when installed as
instructed. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to reduce
the interference by one or more of the following
measures:
FCC COMPLIANCE
& ADVISORY STATEMENT
FCC COMPLIANCE
& ADVISORY STATEMENT
1.
Reorient the receiving antenna.
2.
Increase the separation between the equipment
and receiver.
3.
Connect the equipment to an outlet on a
circuit different from that to which the receiver is
connected.
4.
Consult the dealer or an experienced radio/TV
technician for help.
Any special accessories needed for compliance are
specified in the instruction manual.
WARNING:
A shielded-type power cord is required in order to
meet FCC emission limits and also to avoid interfering
with any nearby radio and television reception. It is
essential that only the supplied power cord is used.
Use only shielded cables to connect I/O devices to
this equipment.
ATTENTION:
Any changes or modifications not
expressly approved by the party responsible for
compliance could void your authority to operate the
equipment.
