Indmar 350 H.O. Скачать руководство пользователя | Manualshive

Страница: 79 / 80

background image

C-4

Indmar Marine Engines

e. Voiding Warranty. This warranty is specifically voided and shall NOT apply under the following conditions:

i.

When the product or any part thereof is subjected to accident, alteration, modifications, abuse, misuse, neglect,
or improper maintenance.

ii.

When the product is serviced by unauthorized persons; or

iii.

When damage to the product results from causes not arising from defects in material and/or workmanship.

THE WARRANTY STATED ABOVE IS A LIMITED WARRANTY AND IT IS THE ONLY WARRANTY MADE BY INDMAR. INDMAR
DOES NOT MAKE ANY OTHER WARRANTIES EXPRESS OR IMPLIED. THERE ARE EXPRESSLY EXCLUDED ALL WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. INDMAR SHALL HAVE NO LIABILITY
WITH RESPECT TO ITS OBLIGATIONS UNDER THIS WARRANTY OR OTHERWISE FOR CONSEQUENTIAL, EXEMPLARY,
INCIDENTAL OR PUNITIVE DAMAGES EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE
STATED EXPRESS WARRANTY IS IN LIEU OF ALL LIABILITIES OR OBLIGATIONS OD INDMAR FOR DAMAGES ARISING
OUT OF OR IN CONNECTION WITH THE DEVELOPMENT, DELIVERY, USE, OR PERFORMANCE OF THE PRODUCT. IN ANY
EVENT THE LIABILITY OF INDMAR FOR ANY REASON AND UPON ANY CAUSE OF ACTION WHATSOEVER SHALL BE LIM-
ITED TO THE AMOUNT THEN PREVIOUSLY PAID FOR THE PRODUCT.

Indmar does not authorize any person, firm or corporation to alter this Limited Warranty or create any other obligation relating to the
product. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Indmar Products Co., Inc.
5400 Old Millington Road
Millington, Tennessee 38053

OM0502-04 Body 11/14/03 11:23 AM Page C-4

«
...
77
78
79
80
»

Содержание 350 H.O.

















































































Отзывы:

Нет отзывов

Похожие инструкции для 350 H.O.

Бренд: Eaton Страницы: 24

Бренд: Saito Страницы: 4

Бренд: Tanaka Страницы: 10

Бренд: R.A. Lister Страницы: 84

Бренд: CHERUBINI Страницы: 24

Бренд: fadini Страницы: 56

2005 ENDUCROSS EC 125

Бренд: GAS GAS Страницы: 50

Бренд: ROJ Страницы: 60

Бренд: Protek Страницы: 20

Бренд: Volvo Penta Страницы: 8

Бренд: Volvo Penta Страницы: 20

Бренд: Nederman Страницы: 44

Бренд: Briggs & Stratton Страницы: 60

Бренд: Lycomin Страницы: 171

Бренд: Louvolite Страницы: 2

Бренд: Yanmar Страницы: 317

Бренд: Honda Страницы: 91

Бренд: WilTec Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды