Appendix
The micro-controller is now in de-brick mode and the FLIP tool will now find it.
First, select the processor type AT90USB162, then select Settings->Communication->USB:
Now load the micro-controller hex file by clicking on file->Load hex file. The final step is to click
on the “Run” button within FLIP (at the bottom left of the window) and watch the program do its
magic. After programming the micro controller, FLIP will indicate the successful steps with a green
light next to the action tags:
Note: The checksum may be different for a possible update.
That's it – the micro-controller is now up to date, and you can leave de-brick mode by powering off
and opening the de-brick jumper. Before you can make use of the new micro-controller software,
you may need to update your version of ChaCo (the Chameleon Control software), and you may
also have to update one of the flash slots. Please read the respective instructions for ChaCo for those
steps.
69
